Hello, I have Samsung multifunction M2070 on an Arch linux.
The scanner is detected:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x3469 [M2070 Series]) at libusb:004:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
The sane version is 1.0.24
I've tryed with the Samsung Unified linux driver versions: 1.00.29 and 1.00.35
scanimage:
[root@portatil manel]# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
When I try to scan with Xsane all I get is the message that no scanner is available.
Any ideas to get it work, I don't know what else I can do.
Thank you!
The scanner is detected:
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
# Also you need support for SCSI Generic (sg) in your operating system.
# If using Linux, try "modprobe sg".
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.], product=0x3469 [M2070 Series]) at libusb:004:002
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
The sane version is 1.0.24
I've tryed with the Samsung Unified linux driver versions: 1.00.29 and 1.00.35
scanimage:
[root@portatil manel]# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
When I try to scan with Xsane all I get is the message that no scanner is available.
Any ideas to get it work, I don't know what else I can do.
Thank you!