Hi,
I'm currently testing Fedora 25 Beta, but scanning with my M2875FD does not work, because the device is not found. I tried the 1.00.37.00.99 driver, that I used successfully before on Fedora 24. Additionally I tried 1.00.29 which worked on F23 and F24, but this one also fails on F25.
On F24:
# scanimage -L
device `smfp:net;192.168.1.10' is a Samsung M267x 287x Series on 192.168.1.10 Scanner
On F25 Beta:
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I used Wireshark to compare what's different on F24 and F25: On 24, snmp packages are sent to the device during the discovery, while this does not happen on F25.
If I run the "smfpnetdiscovery" command from the install directory: It finds the device in the network. The output of the command is the same on F24 and F25:
# x86_64/smfpnetdiscovery
network socket://192.168.1.10 "Samsung M267x 287x Series" "Samsung M267x 287x Series on 192.168.1.10" "MFG:Samsung;CMD:PCL6,URF,FAX,FWV,PIC,SPDS,EXT;MDL:M267x 287x Series;CLS:PRINTER;CID:SA_PCL6_BW;MODE:FAX3,SCN,SPL3,R000105,SCP;"
network ipp://192.168.1.10 "Samsung M267x 287x Series" "Samsung M267x 287x Series on 192.168.1.10" "MFG:Samsung;CMD:PCL6,URF,FAX,FWV,PIC,SPDS,EXT;MDL:M267x 287x Series;CLS:PRINTER;CID:SA_PCL6_BW;MODE:FAX3,SCN,SPL3,R000105,SCP;"
There is no local firewall installed, nor between the computer and the M2875FD. Both devices are in the same subnet.
Please let me know if I can provide any further debug information.
Regards
I'm currently testing Fedora 25 Beta, but scanning with my M2875FD does not work, because the device is not found. I tried the 1.00.37.00.99 driver, that I used successfully before on Fedora 24. Additionally I tried 1.00.29 which worked on F23 and F24, but this one also fails on F25.
On F24:
# scanimage -L
device `smfp:net;192.168.1.10' is a Samsung M267x 287x Series on 192.168.1.10 Scanner
On F25 Beta:
# scanimage -L
No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
I used Wireshark to compare what's different on F24 and F25: On 24, snmp packages are sent to the device during the discovery, while this does not happen on F25.
If I run the "smfpnetdiscovery" command from the install directory: It finds the device in the network. The output of the command is the same on F24 and F25:
# x86_64/smfpnetdiscovery
network socket://192.168.1.10 "Samsung M267x 287x Series" "Samsung M267x 287x Series on 192.168.1.10" "MFG:Samsung;CMD:PCL6,URF,FAX,FWV,PIC,SPDS,EXT;MDL:M267x 287x Series;CLS:PRINTER;CID:SA_PCL6_BW;MODE:FAX3,SCN,SPL3,R000105,SCP;"
network ipp://192.168.1.10 "Samsung M267x 287x Series" "Samsung M267x 287x Series on 192.168.1.10" "MFG:Samsung;CMD:PCL6,URF,FAX,FWV,PIC,SPDS,EXT;MDL:M267x 287x Series;CLS:PRINTER;CID:SA_PCL6_BW;MODE:FAX3,SCN,SPL3,R000105,SCP;"
There is no local firewall installed, nor between the computer and the M2875FD. Both devices are in the same subnet.
Please let me know if I can provide any further debug information.
Regards