Recent posts

#91

Printing / Re: Howto enable SULD drivers ...

Last post by bchemnet - September 28, 2021, 06:19:13

Is it possible that @markosjal and @schluppschlupp are encountering these problems because they are using a 32 bit Raspberry Pi OS?

Although I do not have any device to test with it, I believe the process should work with 32 bit as well.  Try replacing "amd64" with "i386" everywhere it appears.

#92

Printing / Re: Howto enable SULD drivers ...

Last post by yamahito - September 28, 2021, 06:03:00

Is it possible that @markosjal and @schluppschlupp are encountering these problems because they are using a 32 bit Raspberry Pi OS?

I think that this is the problem for me, and I encountered many similar messages to those posted above.

#93

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by adzika - September 26, 2021, 02:29:32

Success! Thanks so much for the help, really appreciate it.

#94

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by bchemnet - September 25, 2021, 15:15:51

Perhaps you do not have the Ubuntu "universe" repository active.  The last time I used Ubuntu (many years ago) that repository was active by default, but it seems that changed at some point.

Try

Code Select Expand


sudo add-apt-repository universe
sudo apt update


or see if you have the "community" (universe) repository active under your Software & Updates settings.

Then try installing the driver package again.

#95

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by adzika - September 25, 2021, 13:46:04

Unfortunately:
oem@Kevin:~$ sudo apt install suld-driver2-1.00.39
Reading package lists... Done
Building dependency tree       
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:

The following packages have unmet dependencies:
suld-driver2-1.00.39 : Depends: libusb-0.1-4 but it is not installable
E: Unable to correct problems, you have held broken packages.

#96

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by bchemnet - September 25, 2021, 13:43:53

Now you should be able to do:

Code Select Expand


sudo apt update
sudo apt install suld-driver2-1.00.39


Probably you will be all set at this point.  But if not, delete & reinstall the printer.

#97

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by adzika - September 25, 2021, 13:41:21

You are right:o
em@Kevin:~/Downloads$ sudo dpkg -i suldr-keyring_2_all.deb
[sudo] password for oem:
(Reading database ... 201375 files and directories currently installed.)
Preparing to unpack suldr-keyring_2_all.deb ...
Unpacking suldr-keyring (2) over (2) ...
Setting up suldr-keyring (2) ...

But still I get:
Idle - File "/usr/lib/cups/filter/rastertospl" not available: No such file or directory

#98

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by bchemnet - September 25, 2021, 13:13:39

Make sure your current terminal directory is the same as where you downloaded.  You might need to

Code Select Expand


cd ~/Downloads

or similar to depending on where your downloads are saved, before trying the dpkg command.

#99

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by adzika - September 25, 2021, 13:09:32

Understood, I did this a few years ago and it took a bit but it was not so messy.

Anyway,  i did
download it from https://www.bchemnet.com/suldr/pool/debian/extra/su/suldr-keyring_2_all.deb

But now I get
oem@Kevin:~$ sudo dpkg -i suldr-keyring_2_all.deb
[sudo] password for oem:
dpkg: error: cannot access archive 'suldr-keyring_2_all.deb': No such file or directory

I appreciate the help. This thing is driving me crazy

#100

Printing / Re: Samsung M2022 - RASTERTOSP...

Last post by bchemnet - September 25, 2021, 13:00:31

You need to install the suldr-keyring package first to set up the secure package system.  If you are unable to do so from the repository by explicitly specifying it, then download it from https://www.bchemnet.com/suldr/pool/debian/extra/su/suldr-keyring_2_all.deb and then

Code Select Expand


sudo dpkg -i suldr-keyring_2_all.deb


I have not worked with this particular printer, but I think the ppd explicitly depends on some of the Samsung binaries such as rastertospl.  So perhaps when you did this before, you also extracted those or had them installed from a previous attempt at setting up the driver.