Problem with suld-scantopc-gui

[Blümchen Blau]

Hi to all forum-members,

I am new an hope, to meet the "requirements" for a good posting in this forum. :-)
First to system(s): Using Ubuntu (Unity) 14.04 32bit-flavor on a Lenovo X220 and a CLX-6220FX over LAN with the bchemnet-Repositories installed the printer works fine in a wide range of functionality.
As "basic-drivers" I installed:
- suld-ppd-3
- suld-driver2-common-1
- suld-driver2-1.00.06

So far so good.

As I tried to set up the "scan to pc-function" of my 6220, I installed the packages
- suld-scantopc
- suld-scantopc-gui

And then the following problems within the installation with synaptic occur:
---- Quotation: ----
(synaptic:11505): GLib-CRITICAL **: g_child_watch_add_full: assertion 'pid > 0' failed
Vormals nicht ausgewähltes Paket suld-scantopc wird gewählt.
(Lese Datenbank ... 176562 Dateien und Verzeichnisse sind derzeit installiert.)
Vorbereitung zum Entpacken von .../suld-scantopc_0.4.5-3_all.deb ...
Entpacken von suld-scantopc (0.4.5-3) ...
Vormals nicht ausgewähltes Paket suld-scantopc-gui wird gewählt.
Vorbereitung zum Entpacken von .../suld-scantopc-gui_0.4.5-1_all.deb ...
Entpacken von suld-scantopc-gui (0.4.5-1) ...
Trigger für ureadahead (0.100.0-16) werden verarbeitet ...
ureadahead will be reprofiled on next reboot
Trigger für hicolor-icon-theme (0.13-1) werden verarbeitet ...
Trigger für gnome-menus (3.10.1-0ubuntu2) werden verarbeitet ...
Trigger für desktop-file-utils (0.22-1ubuntu1) werden verarbeitet ...
Trigger für bamfdaemon (0.5.1+14.04.20140310-0ubuntu1) werden verarbeitet ...
Rebuilding /usr/share/applications/bamf-2.index...
Trigger für mime-support (3.54ubuntu1) werden verarbeitet ...
suld-scantopc (0.4.5-3) wird eingerichtet ...
* Stopping Samsung Scanner Server samsungScannerServer                  [ OK ]
* Starting Samsung Scanner Server samsungScannerServer                  [ OK ]
suld-scantopc-gui (0.4.5-1) wird eingerichtet ...
invoke-rc.d: syntax error: missing required parameter
dpkg: Fehler beim Bearbeiten des Paketes suld-scantopc-gui (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 103 zurück
Fehler traten auf beim Bearbeiten von:
suld-scantopc-gui
E: Sub-process /usr/bin/dpkg returned an error code (1)
Ein Paket konnte nicht installiert werden. Wiederherstellung wird versucht:
suld-scantopc-gui (0.4.5-1) wird eingerichtet ...
invoke-rc.d: syntax error: missing required parameter
dpkg: Fehler beim Bearbeiten des Paketes suld-scantopc-gui (--configure):
Unterprozess installiertes post-installation-Skript gab den Fehlerwert 103 zurück
Fehler traten auf beim Bearbeiten von:
suld-scantopc-gui
---- Quotation end ----

With that result I get a "broken" icon in the Unity-panel which shows the respective menu, but trying to i.e. restart the server I get as feedback:
cannot be restarted
Networkscanner not available
(the device - my 6220 is "up and running")

As additional information I attach the LogFile.

I use Ubuntu (and derivatives) since 2008 and think, that I am not a "noob". But I do not get enough of a clue, how to overcome that. Can anyone help, or has/had the same problem (and hopefully a solution to it)?

BB

[bchemnet]

I am about to post slightly modified versions of these packages, which may address your problem.

[Blümchen Blau]

Installation of the packages worked flawlessly now, but the Server seems to find no Scanner (although simple-scan does).
I've attached the logfile. Maybe you can interpret the problem.
BB

Edit: And ... sorry, that I started this thread in the wrong Forum.

[dvenema]

I get the same error in my logfile when trying to start the scanner server. I run Ubuntu 12.04 32bit.
Disabling the firewall (ufw) has no effect.

[bchemnet]

You can try posting in the development thread to see if the original developers of the scripts can help.  I can see where the problem is, but don't have a device with which I could test any fix (and honestly don't have time to debug it even if I did).