SULDR Forums Supported Printers Printing Questions Scanning Questions General Questions Samsung Installer

Author Topic: CLP 315 with Debian Wheezy amd64  (Read 2353 times)


  • Testing the water
  • **
  • Posts: 1
    • View Profile
  • Linux Distribution: Debian Wheezy
  • Printer: CLP 315
CLP 315 with Debian Wheezy amd64
« on: April 25, 2014, 19:38:48 »

I have a Samsung CLP 315. I tested the printer with a 32 bit  debian wheezy. I got horrible output with foo2qpl and then I tried the driver from this page. The output was better but there was too much red in the picture and it didn't look good. Then I went to the samsung website and downloaded the driver version 3.00.65 . I installed this driver and it worked. The colors were almost ok. Then i tried this on my wheezy amd64 server. The other printer drivers had the same output. After installing the driver from the Samsung website, I printed a test page. The page has the half/double problem.

The drivers from the repository give bad results. How can I get good results with my amd64 server?

Thanks in advance.


  • Administrator
  • *****
  • Posts: 547
    • View Profile
  • Linux Distribution: Debian Testing
  • Printer: none
Re: CLP 315 with Debian Wheezy amd64
« Reply #1 on: May 04, 2014, 13:43:16 »
Have you tried the 3.00.65 driver from the repository?

Otherwise, you don't need the repository if the direct install works for the server.


Repository Information Legal Contact Alternative Drivers