SULDR Forums Supported Printers Printing Questions Scanning Questions General Questions Samsung Installer

Another apt-get update problem

Started by k8dbg, June 13, 2014, 19:48:16

Previous topic - Next topic

k8dbg

Greetings. I've read the faq's and threads on this topic. If I missed the answer I apologize.

I'm trying to enable scanning with an SCX-4521F. I edited /etc/apt/sources.list and appended the line:

deb http://www.bchemnet.com/suldr/ debian extras

When I try apt-get update I get the following error:

W: Failed to fetch http://www.bchemnet.com/suldr/dists/debian/Release  Unable to find expected entry 'extras/binary-i386/Packages' in Release file (Wrong sources.list entry or malformed file)

I don't know enough about the update/repository process to get further. I appreciate any help.

Jeff

bchemnet

It looks like a typo.  You have "extras" where it should be "extra" (no "s").

k8dbg

Thanks for the quick answer. I cut & pasted that string from somewhere -- unfortunately not your web page, but one of the copy cats I found through DuckDuckGo.

Works as advertised. I appreciate the help.

Thanks,
Jeff

Deteklover

Hi,

I have same issue, impossible to connect to the repository.
The deb line was copy/paste from faq.

Here is the apt error :
W: Impossible de récupérer http://www.bchemnet.com/suldr/dists/debian/Release  Impossible de trouver l'entrée « extra/binary-armhf/Packages » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu

E: Le téléchargement de quelques fichiers d'index a échoué, ils ont été ignorés, ou les anciens ont été utilisés à la place.

Any idear ?

bchemnet

Quote from: Deteklover on December 12, 2014, 04:12:11
Here is the apt error :
W: Impossible de récupérer http://www.bchemnet.com/suldr/dists/debian/Release  Impossible de trouver l'entrée « extra/binary-armhf/Packages » attendue dans le fichier « Release » :  ligne non valable dans sources.list ou fichier corrompu

ARM-HF architecture is not provided by Samsung.  So although there is an "arm" driver, it does not actually work with most modern arm systems.  Only "armel" works.

Deteklover

Thanks for your answer !

I use an Raspberry Pi B+, do you know if there is a drivers available for it ?
Thanks a lot

bchemnet

Not unless you change the distribution.  On most devices it is possible to run an armel distribution by wiping what is currently installed and starting over.  But I haven't tried with any Raspberry Pi.

Repository Information Legal Contact Alternative Drivers