Sticky
SULDR Forums Supported Printers Printing Questions Scanning Questions General Questions Samsung Installer

Author Topic: Scanning with Xsane on M2675 generates error message  (Read 1136 times)

svgt

  • Testing the water
  • **
  • Posts: 2
    • View Profile
  • Linux Distribution: LinuxMint 17.3 Mate 64bit
  • Printer: M2675
Scanning with Xsane on M2675 generates error message
« on: November 21, 2016, 15:50:17 »
Hello,

I use the Samsung Xpress M2675FN device. The Linux distribution is LinuxMint 17.3 Mate 64bit.
Connection via USB.
I installed the driver >suld-driver-4.01.17<

If I use the Xsane scan program,  I get the message:

smfb: SAMSUNG M267x M287x Series on USB:0 Error during device I/O

The first action I tried was to deinstall sane xsane and reinstall both.
No success. Same error message.

best regards
svgt

bchemnet

  • Administrator
  • *****
  • Posts: 524
    • View Profile
  • Linux Distribution: Debian Testing
  • Printer: none
Re: Scanning with Xsane on M2675 generates error message
« Reply #1 on: November 21, 2016, 22:23:49 »
I suggest trying suld-driver2-1.00.36.

svgt

  • Testing the water
  • **
  • Posts: 2
    • View Profile
  • Linux Distribution: LinuxMint 17.3 Mate 64bit
  • Printer: M2675
Re: Scanning with Xsane on M2675 generates error message
« Reply #2 on: November 22, 2016, 14:25:02 »
Thank you for this information.

The printer and the scanner are performing well.

I will set a link in the German Ubuntu forum  www.ubuntuusers.de

best regards
svgt

 

Repository Information Legal Contact Alternative Drivers