SULDR Forums Supported Printers Printing Questions Scanning Questions General Questions Samsung Installer

Trouble Scanning on a network MFP SCX-4300

Started by LastStarDust, September 23, 2017, 10:38:49

Previous topic - Next topic

LastStarDust

Hello.
This is my rig:
Ubuntu 14.04 64bit on the same network
Samsung SCX-4300 linked through a Netgear PS121v2
Network Printer IP address: 192.168.1.100
No firewall active
The command "/opt/Samsung/mfp/bin/netdiscovery --all --scanner" returns only "# DEBUG: Network printers discovery utility"
The command "sudo scanimage -L" returns "No scanners were identified..."

These are the packages that I installed from the repository:
neo@zion:~$ dpkg -l | grep suld
ii  libtiff3-suld                          3.6.1-3   
ii  suld-configurator-2-qt4         4.01.21-2                 
ii  suld-driver-4.01.17               4.01.17-4         
ii  suld-driver-common-1          1-9       
ii  suld-network-2                    4.01.17-2   
ii  suld-ppd-2                          4.01.17-4 
ii  suldr-keyring                       2

These are the files that I modified:
/etc/default/saned
RUN=yes

/etc/sane.d/net.conf
## saned hosts
192.168.1.100

/etc/sane.d/saned.conf
## Access list
192.168.1.100

/etc/sane.d/xerox_mfp.conf
# Samsung SCX-4300
# usb 0x04e8 0x342e
tcp 192.168.1.100

LastStarDust

#1
I can print with no issues from linux. I can print and scan from windows.

LastStarDust

#2
Isn't there really any one who could help or at least point me in the right direction?
Please ...

Repository Information Legal Contact Alternative Drivers