Sticky
SULDR Forums Supported Printers Printing Questions Scanning Questions General Questions Samsung Installer

Author Topic: Network printer installation problem  (Read 14 times)

Nemo23

  • Testing the water
  • **
  • Posts: 3
    • View Profile
  • Linux Distribution: Raspbian
  • Printer: Samsung ML-1665
Network printer installation problem
« on: December 03, 2019, 04:18:25 »
Goodmorning everyone,
I use a raspberrypi 4 with on Raspbian as home server, to this server I would like to connect my samsung printer 1665 ml to be able to print remotely ... I installed cups and downloaded the ppd and rastertospl files from the site ... I gave permission with :

sudo chmod 755 /usr/lib/cups/filter/rastertospl
chown root:root /usr/lib/cups/filter
chown root:root /usr/lib/cups/backend

and installed the printer through cups graphic interface ... when I go to print I get the following error: "File "/usr/lib/cups/filter/rastertospl" has insecure permissions (0100755/uid=1000/gid=1000)."

I then followed the guide on the forum, inserted the new line and updated the repository, but I receive this:

pi@raspberrypi:~ $ sudo apt update
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease         
Hit:3 https://www.bchemnet.com/suldr debian InRelease                   
Reading package lists... Done
Building dependency tree       
Reading state information... Done
All packages are up to date.
W: Target Packages (extra/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Packages (extra/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Translations (extra/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Translations (extra/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
N: Skipping acquire of configured file 'extra/binary-armhf/Packages' as repository 'https://www.bchemnet.com/suldr debian InRelease' doesn't support architecture 'armhf'
W: Target Packages (extra/binary-armhf/Packages) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Packages (extra/binary-all/Packages) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Translations (extra/i18n/Translation-en_GB) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5
W: Target Translations (extra/i18n/Translation-en) is configured multiple times in /etc/apt/sources.list:4 and /etc/apt/sources.list:5

would anyone know how to tell me how should I do? Thanks
« Last Edit: December 03, 2019, 05:23:23 by Nemo23 »

bchemnet

  • Administrator
  • *****
  • Posts: 526
    • View Profile
  • Linux Distribution: Debian Testing
  • Printer: none
Re: Network printer installation problem
« Reply #1 on: December 03, 2019, 21:05:57 »
This driver will not work with the Raspberry Pi 4, no matter how you try to install it.  The issue is that the driver for ARM processors is built only for much older processers than the type used in the Raspberry Pi.

There is some evidence that the printer may work if you install the splix driver (printer-driver-splix package), and set it up as a ML-1660 printer.  This method should be compatible with the Raspberry Pi.

Nemo23

  • Testing the water
  • **
  • Posts: 3
    • View Profile
  • Linux Distribution: Raspbian
  • Printer: Samsung ML-1665
Re: Network printer installation problem
« Reply #2 on: December 04, 2019, 03:56:38 »

Where can I download this package?

bchemnet

  • Administrator
  • *****
  • Posts: 526
    • View Profile
  • Linux Distribution: Debian Testing
  • Printer: none
Re: Network printer installation problem
« Reply #3 on: December 04, 2019, 06:35:24 »
It is part of the standard Debian and Raspbian repository, so you should be able to install it the same way as any other package.

Nemo23

  • Testing the water
  • **
  • Posts: 3
    • View Profile
  • Linux Distribution: Raspbian
  • Printer: Samsung ML-1665
Re: Network printer installation problem
« Reply #4 on: December 04, 2019, 07:01:52 »

Sorry, I had asked the wrong question, I wanted to know where to get the ppd file, instead I download it myself ... I installed the package and reinstalled the printer via cups and now it works! Thanks

 

Repository Information Legal Contact Alternative Drivers